How to sew the plastic bottle holder (300ml)
Today’s handcrafted goods is “300ml plastic bottle holder with lining".
![300ml plastic bottle holder](https://www.jewel-track.com/wp-content/uploads/2020/02/post_590a.jpg)
Materials
Outer fabrics, 15.5cm by 15cm are 2 pieces. (Seam allowances are included)
![outer fabrics](https://www.jewel-track.com/wp-content/uploads/2020/02/post_590b.jpg)
Inner fabrics, 15cm by 14.5cm are 2 pieces. (Seam allowances are included)
![Inner fabrics](https://www.jewel-track.com/wp-content/uploads/2020/02/post_590c.jpg)
For drawstring fabric is 10cm by 27cm. (Seam allowances are included)
![drawstring fabric](https://www.jewel-track.com/wp-content/uploads/2020/02/post_590d.jpg)
Sew the edge of fabric with zig zag stitch. (for anti-fray)
![zig zag stitch](https://www.jewel-track.com/wp-content/uploads/2020/02/post_590e.jpg)
Cord is 45cm.
![cord](https://www.jewel-track.com/wp-content/uploads/2020/02/post_590f.jpg)
Make outer
1. Lay the outer fabrics with right side, and sew the side and bottom.
![sew the side and bottom](https://www.jewel-track.com/wp-content/uploads/2020/02/post_590g.jpg)
2. Cut off extra cloths, and press seam allowances open. Then make gusset, and sew.
![cut off extra cloths](https://www.jewel-track.com/wp-content/uploads/2020/02/post_590h.jpg)
![press seam allowances open](https://www.jewel-track.com/wp-content/uploads/2020/02/post_590i.jpg)
![sew the gusset](https://www.jewel-track.com/wp-content/uploads/2020/02/post_590j.jpg)
3. Cut the extra seam allowances (2.5cm).
![cut the extra seam allowances](https://www.jewel-track.com/wp-content/uploads/2020/02/post_590k.jpg)
Make inner
1. Lay the inner fabrics with right side, and sew the side and bottom. (Leaving 6cm open for turning.)
![sew the side and bottom](https://www.jewel-track.com/wp-content/uploads/2020/02/post_590l.jpg)
2. Cut off extra cloths, and press seam allowances open. Then make gussets, and sew.
![cut off extra cloths](https://www.jewel-track.com/wp-content/uploads/2020/02/post_590m.jpg)
![make gussets](https://www.jewel-track.com/wp-content/uploads/2020/02/post_590n.jpg)
3. Cut the extra seam allowances (2.5cm).
![cut the extra seam allowances](https://www.jewel-track.com/wp-content/uploads/2020/02/post_590o.jpg)
Make drawstring fabric
1. Fold the drawstring fabric in half with right side. Then sew.
![fold in half](https://www.jewel-track.com/wp-content/uploads/2020/02/post_590p.jpg)
![sew](https://www.jewel-track.com/wp-content/uploads/2020/02/post_590q.jpg)
2. Press seam allowances open, and stitch. (Be careful about sewing for the next steps)
![stitch](https://www.jewel-track.com/wp-content/uploads/2020/02/post_590r.jpg)
3. Fold in half, and baste the bottom edge.
![baste](https://www.jewel-track.com/wp-content/uploads/2020/02/post_590s.jpg)
4. Stitch. (2cm from the top edge.)
![stitch](https://www.jewel-track.com/wp-content/uploads/2020/02/post_590t.jpg)
Make bottle holder
1. Baste the outer fabric and drawstring fabric with right side together.
![baste the outer fabric and drawstring fabric](https://www.jewel-track.com/wp-content/uploads/2020/02/post_590u.jpg)
2. Insert the inner into the outer with right side together. Then sew around.
![sew around](https://www.jewel-track.com/wp-content/uploads/2020/02/post_590v.jpg)
3. Turn inside out, and sew the edge.
![pull out](https://www.jewel-track.com/wp-content/uploads/2020/02/post_590w.jpg)
![sew the edge](https://www.jewel-track.com/wp-content/uploads/2020/02/post_590x.jpg)
4. Stitch.
![stitch](https://www.jewel-track.com/wp-content/uploads/2020/02/post_590y.jpg)
5. Thread the cord through, and tie the cord ends. It’s done.
![thread the cord through](https://www.jewel-track.com/wp-content/uploads/2020/02/post_590z.jpg)
![plastic bottle holder](https://www.jewel-track.com/wp-content/uploads/2020/02/post_590za.jpg)
Making movie is the following.
Discussion
New Comments
No comments yet. Be the first one!